TEXTILE REINFORCED HYDRAULIC HOSE SAE 100R6/ DIN EN 854 1TE

SAE 100R6/ DIN EN 854 1TE  hose structure:  

Inner tube: seamless oil resistant synthetic rubber

Reinforcement: one high resistance synthetic fiber braids

Outer tube: Black, oil, weather and abrasion resistant synthetic rubber.

Temperature range: -40 to +100°C (-40 to +212°F);

Safety factor: 4:1;


Share
down load to pdf

Details

Tags

PRODUCTS DISPLAY

  • TEXTILE REINFORCED HYDRAULIC HOSE SAE 100R6/ DIN EN 854  1TE
  • TEXTILE REINFORCED HYDRAULIC HOSE SAE 100R6/ DIN EN 854  1TE

PRODUCTS INTRODUCTION

SAE 100 R6/DIN EN854 1TE  textile reinforced hydraulic hose is suitable for delivering petroleum or water-based hydraulic fluids and it is mainly used in low pressure conditions. It is composed of three parts: tube, reinforcement and cover. The tube is made from high quality black synthetic rubber, which is resistant to oil, abrasion and corrosion. Therefore, the hose is widely used in the delivery of petroleum or water-based hydraulic fluids. The reinforcement is made from one layer of braided textile, making it widely used in low pressure applications. The cover is made from high quality synthetic rubber, which is resistant to abrasion, corrosion, weather, ozone, cut, aging and sunlight. The hose has longer service life.

BAILI can manufacture the high-quality hose according to your requirements and can print your logo on the hose cover surface. BAILI can offer with both wrapped and smooth cover with maximum length 100m per roll. Type 1TE and SAE 100 R6 are not subjected to the impulse or vacuum resistance test.

 SAE 100 R6 and EN854 1TE has the following differences:

  • Type R6 has higher working pressure and burst pressure than 1TE hose.
  • Per ISO 4079 standard, R6 varies in sizes from 3/16”to 3/4”. While 1TE hose varies in sizes from 3/16” to 4”.
  • 1TE hose has a better bend radius then R6 hose.  

SPECIFICATION

Hose ID

Hose OD

W.P(working pressure)

B.P(burst pressure)

Min Bend Radius

Weight

inch

mm

mm

MPa

Psi

MPa

Psi

mm

kg/m

3/16

4.8

11.1

3.4

500

13.8

2000

50

0.11

1/4

6.4

12.7

2.8

400

11.0

1600

65

0.15

5/16

7.9

14.3

2.8

400

11.0

1600

75

0.16

3/8

9.5

15.9

2.8

400

11.0

1600

75

0.18

1/2

12.7

19.8

2.8

400

11.0

1600

100

0.26

5/8

15.9

23.0

2.4

350

9.7

1400

125

0.29

3/4

19.0

26.6

2.1

300

8.3

1200

150

0.4

APPLICATION

SAE 100 R6/DIN EN8854 1TE hydraulic hose is commonky used in low working pressure conditions including return & suction lines, power steering return hoses, lube lines and air lines without brake applications.

FACTORY LAYOUT

PACKAGE & DELIVERY

FAQ

Q1. Do you produce smooth or cloth wrapped cover?

  1. Both, we can produce both cover, which depends on customer’s request.

 

Q2. Do you produce embossed marking?

  1. Yes, we do provide embossed and printing markings with different color.

 

Q3. Does your product have different color hose?

  1. Yes, we currently provide black, grey, red, blue and yellow.

 

Q4. How long does my order take to be delivered?

  1. It usually takes 5 to 30 days, which generally depends on the quantity of your order and our storage.

 

You could contact us in anytime if there is any question and we promise to reply you within 24 hours. We will do better than you think! 

SEND INQUIRY

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.


Write your message here and send it to us

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.


en_USEnglish