DIN EN 854 2TE hose structure:

DIN EN 854 2TE is mainly used in the machine building industry and hydraulic equipment. It is composed of 3 layers. Internal tube, reinforcement and cover. We can do both wrapped and smooth cover and also have customized printing. The maximum pressure can be up to 80bar with 1160PSI. Available sizes from 3/16 to 1”with wrapped and smooth cover.  For type 2TE hoses, when tested at an impulse pressure equal to 125 % of the maximum working pressure, the hose shall withstand a minimum of 100 000 impulse cycles. There shall be no leakage or other evidence of failure before reaching the specified number of cycles.

Textile reinforced rubber hose for hydraulic control lines. Discharge under pressure of hydraulic fluids, grease, air and water.Medium in details:

— oil-based hydraulic fluids HH, HL, HM, HR and HV as defined in ISO 6743-4 at temperatures ranging

from −40 °C to +100 °C;

— water-based fluids HFC, HFAE, HFAS and HFB as defined in ISO 6743-4 at temperatures ranging

from 0 °C to +60 °C;

— water at temperatures ranging from 0 °C to +60 °C.

Advantages:

Light weight and flexible due to the textile reinforcement. Elimination of vibrations in hydraulic lines. Hose cover is highly resistant to oil and grease.

Q1. Do you produce smooth or cloth wrapped cover?

1. Both, we can produce both cover, which depends on customer’s request.

Q2. Do you produce embossed marking?

1. Yes, we do provide embossed and printing markings with different color.

Q3. Does your product have different color hose?

1. Yes, we currently provide black, grey, red, blue and yellow.

Q4. How long does my order take to be delivered?

1. It usually takes 5 to 30 days, which generally depends on the quantity of your order and our storage.

You could contact us in anytime if there is any question and we promise to reply you within 24 hours. We will do better than you think!