HIGH PRESSURE HYDRAULIC HOSE SAE 100 R12

DIN EN856 R12 /SAE 100 R12  hose structure

Inner tube: seamless oil resistant synthetic rubber

Reinforcement: four spirals of high-tensile steel wire.

Outer tube: Black, oil, weather and abrasion resistant synthetic rubber.

Temperature range: -40 to +100°C (-40 to +212°F);

Safety factor: 4:1;

Application: petroleum base hydraulic fluids

Surface: wrapped and smooth cover


Share
down load to pdf

Details

Tags

PRODUCTS DISPLAY

  • 详情
  • 主图2

PRODUCTS INTRODUCTION

SAE 100R12 Hydraulic Hose is recommended for hydraulic system service with petroleum and water-base fluids, or general industrial service. This is a kind of ideal hose for high impulse applications. Because of smaller inner diameter compared with 4SP hoses, the cover does not need to skiving when do hose assembly. Its consistent working pressure up to 4000PSI from 3/8” to 1” .Sizes are available from 3/8" to 2" ID. R12 hydraulic hose can bears with minimum 500,000 impulse cycles. SAE 100 R12 has constant working pressure with 275 bars from 3/8” to 1.

BAILI hose factory made innovations on the spiral hydraulic hoses recently. 1) We can produce the spiral hose with smooth cover which can offer more alternatives to customers. The smooth spiral hose with high flexibility, high pressure and high impulse. 2) The spiral hoses with steel mandrel will not limit by the short length and the maximum length we can produce is 100m per roll. 3) The wrapped cover SAE 100 R12 hydraulic hoses, we adopted with narrow nylon tape which makes the surface of wrapped cover more compact and good-looking. And this change will enhance the adhesive force between the outer cover and steel wire reinforcement.

SPECIFICATION

DN Hose ID  Wire OD Hose OD W.P(working pressure) B.P(burst pressure) Minimum Bend Radius Weight
  inch mm mm mm MPa Psi MPa Psi mm kg/m
10 3/8 9.5 17.2 20.3 27.5 4000 110.3 16000 125 0.62
13 1/2 12.7 20.7 23.8 27.5 4000 110.3 16000 180 0.85
16 5/8 15.9 24.6 27.4 27.5 4000 110.3 16000 200 1.29
19 3/4 19.0 27.7 30.7 27.5 4000 110.3 16000 240 1.47
25 1 25.4 34.9 38.0 27.5 4000 110.3 16000 300 2.00
32 1-1/4 31.8 43.9 47.0 20.7 3000 82.7 12000 420 2.86
38 1-1/2 38.1 50.4 53.5 17.2 2500 68.9 10000 500 3.24
51 2 50.8 63.7 66.7 17.2 2500 68.9 10000 630 4.80

APPLICATION

Hydraulic system service with petroleum and water-base fluids and for general industrial use. And widely applied with the following areas:

Construction: such as excavators, bulldozers, and loaders, to power and control movement.

Agriculture - such as tractors and harvesters, to power and control movement.

Manufacturing: such as presses and injection molding machines, to power and control movement.

Mining :such as drilling rigs and excavators, to power and control movement.

Transportation: such as trucks and buses, to power and control movement.

FACTORY LAYOUT

PACKAGE & DELIVERY

FAQ

Q1. Do you produce smooth or cloth wrapped cover?

  1. Both, we can produce both cover, which depends on customer’s request.

 

Q2. Do you produce embossed marking?

  1. Yes, we do provide embossed and printing markings with different color.

 

Q3. Does your product have different color hose?

  1. Yes, we currently provide black, grey, red, blue and yellow.

 

Q4. How long does my order take to be delivered?

  1. It usually takes 5 to 30 days, which generally depends on the quantity of your order and our storage.

 

You could contact us in anytime if there is any question and we promise to reply you within 24 hours. We will do better than you think! 

SEND INQUIRY

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.


Write your message here and send it to us

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.


en_USEnglish